Thorwall struck again. This time an improved version of the Sovol SV06 Bedlinger is launched, which is largely inspired by Prusa MK4S. True to its inspiration, the Sovol SV06 ACE (Advanced Compensation Engine) is an open-source machine with a high-flow hot end, ultra-high speed and one-touch bed leveling. Unlike the Prusa, this is an affordable 3D printer priced at only $299.
No doubt some improvements were made to produce this machine, but other than the cooling fan whining, we didn’t find anything troublesome. In fact, the SV06 ACE has what Prusa fans crave: a built-in camera for surveillance and a simple mainsail interface (thanks to the use of the stock Klipper).
The biggest improvement is speed – the SV06 ACE has a speed of up to 600mm/s and can easily print at 300mm/s with good quality. This is largely due to the Klipper and the high-flow nozzle previously seen on the Sovol 07.
For anyone who may have purchased last year’s SVO6, it’s disappointing that you can’t upgrade your old printer to ACE. This is just a new model with a lot of new parts.
The Sovol SV06 retails for $299 and is currently on sale for $269, which shows you don’t need to spend a fortune on a fast printer. The Sovol sv06 ACE has a cruising speed of 300 mm/second and a Benchy time of 13 minutes and 6 seconds, one of them. The best 3D printer This is the price we tested.
Specifications: Sovol SV06 ACE
| construction volume | 220 x 220 x 250 mm (8.6 x 8.6 x 9.84 inches) |
| Material | PLA/PETG/TPU (up to 300 degrees) |
| Extrusion machine | direct drive |
| nozzle | .4mm (high flow) |
| Build a platform | PEI spring steel flexible plate |
| bed leveling | Automatic bed leveling |
| Filament beat sensor | Yes |
| Connectivity | USB, wireless network, LAN |
| interface | touchscreen |
| Machine footprint | 497 x 388 x 611 mm (19.5 x 15.2 x 24 inches) |
| Machine weight | 9 kg (19.8 lbs) |
Sovol SV06: included in the box
The Sovol SV06 comes with everything you need to set up your printer. You’ll get tools to build and maintain the printer, a side cutter, a plastic scraper, spare nozzles, and a microSD card with a USB adapter. There is also a small sample of white PLA available for printing your first model.
You also get a PDF copy of the manual, a copy of OrcaSlicer, and sample models in pre-sliced .gcode and .stl formats.
Design of Sovol SV06
The Sovol SV06 ACE is the successor to the Sovol SV06, also inspired by the open source RepRap movement (in addition to Prusa’s i3 series of printers). The SV06 ACE has a few tricks up its sleeve that make it cheaper and offer some extra features not found on the MK4S.
Sovol sticks to the classic i3 shape while using Sovol Turquoise Blue injection molding. It has a square “Ender Size” bed (220 x 220mm) and a nifty new touchscreen with an easy-to-use interface. The powerful planetary driven extruder and all-metal heating end is now powered by the high-flow nozzle we saw previously Issue SV07.
They ditched the X-axis bearings in favor of metal wheels mounted on metal rods, which provide nice, smooth motion without the wear and tear of plastic POM wheels. The belt tensioner features an easy-to-use knob, which also adds a bit of sparkle to the printer’s design. The Z-axis is reinforced with a 10mm rod with linear bearings and has dual independent motors capable of performing Z-tilt compensation.
The SV06 ACE does away with the magnetic probe of the pressure sensor built directly into the hot end – now it taps the bed to create a self-leveling grid. It also features accelerometers on the tool head and bed for vibration compensation in the Klipper, reducing unsightly ringing artifacts caused by vibration.
There is a built-in lens so you can visually monitor your print results from the Klipper’s mainsail screen. Klipper also makes it easy to send files over WiFi without having to communicate with a cloud server, and has a USB flash drive port.
Assembling Sovol SV06 ACE
The Sovol SV06 ACE requires a small amount of assembly, but you can assemble it in half an hour. You’ll need to bolt the gantry to the base, then rotate the power supply onto the gantry and screw the extruder into its pre-mounted plate. The screen needs to be plugged in and screwed into the frame. The wires are well labeled and the printed instructions are enough to guide you.
Once you have it all together, take a moment to check the tightness of the belt and eccentric nut. There are adjustment knobs on the straps to make this step very easy.
Leveling Sovol SV06 ACE
The Sovol SV06 ACE features hands-free auto-leveling. It will turn its initial alignment to level the bed, then double-check the level before each print. There’s no need to set the Z height, but if you do run into problems, you can easily adjust it through the adjustments menu.
Loading filament on Sovol SV06
Loading the filament is very simple. Simply select “Load Filament” from the menu, select the type of material you want to load, and push the filament into the top of the extruder.
Reverse the process to change colors or remove filament.
Prepare documentation/software for Sovol SV06 ACE
Sovol contains a copy of OrcaSlicer, a free third-party slicer based on the open source PrusaSlicer and BambuStudio. The software contains very good profiles for the SV06 ACE for PLA, PETG, TPU and ABS. I didn’t test the ABS as that would require a case, but it’s good to know it’s there.
I am really happy to see the OrcaSlicer included in this 3D printer as it is one of the best and most advanced slicers available. This can be a little intimidating for beginners, but when you turn off the advanced settings and let the default settings do the work, you’ll still get very beautiful prints.
Print on Sovol SV06 ACE
The Sovol SV06 comes with a white PLA sample coil, but I didn’t bother using it. If you want more colors and materials, such as silk and multi-colored filaments, you should check out our guide The best filament for 3D printing Ask for advice.
I did a speed test and printed a pretty good Benchy in 13 minutes and 8 seconds. I used the speedboat rules (2 walls, 3 top and bottom floors, 10% padding, 0.25 story height and 0.5 story width). The layers along the upper hull and cabin are smooth, with just a slight dip in the bow, but no ringing or layer shifting. This is plain printing Gray Inland Liberation Army.
I printed a lot of dragons for the Christmas market using Sovol SV06 ACE, but you’re probably tired of seeing these. For PLA, let me show you a really cool rustic log key bowl designed by 3D Mieks. The bowl print is divided into two parts, the inner bowl and the outer bowl, which allows you to create more colorful prints with a monochrome machine like this. I have used Prusament Woodfill Linden Lamp For the inner bowl. This light wood-filled filament is made from clear PLA and wood scraps from wood manufacturers. Prusa chose the lime tree because it is the national tree of their Czech homeland. The outer bowl is made from Polymaker Gradient Wood, a two-tone filament that contains no actual wood fibers. I used a blurred skin setting to make it more realistic.
It took 7 hours and 47 minutes to print these two parts using a layer height of 0.2 mm and the PLA default speed settings (outer wall speed 200 mm/s, inner wall speed 270 mm/s). The bowl looks great, no stringiness or bad layers.
For the PETG, I tried a simple box made in Tinkercad and embedded some clip art on the lid. The Sovol SV06 ACE prints beautifully – I use all the walls for heavier, glassy prints. The lid is printed upside down with no support, and the bridge provides an interesting texture to the tree pattern.
The box print time was 1 hour and the lid print time was 43 minutes, both using 0.2 layer height and default PETG settings. The slicer speed of PETG is limited by the maximum flow rate of 12㎣/s. Prusament Ultramarine Clear PETG.
The ACE does a decent job with the flexible filament, albeit with a lot of stringing. These tracks suit me SMRFF death racing Printed using ultra-soft eSUN TPE, its Shore hardness is only 83A. They look like shredded wheat on purpose: with the help of OrcaSlicer, I was able to apply a modified block with a “blur skin” on one edge to give these tracks extra grip. These prints took 1 hour and 52 minutes, using a layer height of 0.28 and OrcaSlicer’s default settings, which limited the maximum volumetric speed to 3.6 ㎣/s.
bottom line
The Sovol SV06 ACE is a 3D printer with impressive features such as a top speed of 600 mm/sec, automatic bed leveling, dual Z-axis motors, vibration reduction, and the ability to print at temperatures up to 300°C Printed direct drive extruder. I really appreciate Sovol sticking to the stock Klipper firmware and including OrcaSlicer – two open source programs that can run independently without causing stress and headaches to the user.
Surveillance cameras and touch screens along with a user-friendly interface prove that Sovol doesn’t just copy their inspirations. They are willing to extend the design to provide users with a great printing experience.
The SV06 Ace is currently priced at $269, which is an affordable price. If you don’t mind the slow speed, you can still arrive early. Sovol SV06 base price is $179 USD. If you’re in the market for your first printer, another machine worth looking at is Bamboo Lab A1 Miniour favorite choice for beginners who want to add a little color to their lives. It’s priced at $349 with a four-color AMS unit.
More: Best 3D Printer
More: Best Budget 3D Printer
More: Best Resin 3D Printer